16" Enkei RPF1 with V710s

Looking for something? Got stuff you want to sell? This is the place to post the messages.

16" Enkei RPF1 with V710s

Postby el_torpedo » Tue Jun 19, 2012 9:35 pm

Selling my autox wheels, call me crazy. :loco:
Set of 4 Enkei RPF1; 16x7; +43 offset; 4x100 bolt pattern; only 13.7 lbs,
wrapped in Kumho V710; 215/40R16. Two are 3/32" deep at the centre tread, two are 7/64" (new is 4/32" according to tirerack).

The rims have never been used outside of Lot 9 and are in excellent shape, no potholes, no curb rash. Slight marks on the edges where wheel balancing weights were installed, so they are not blemish free. Sorry I don't have the centre caps.
The tires were bought 2 summers ago and used for only 4 autox events. Typically they're sticky-good for 10-12 events depending how much you like to slide. :)

Image
Image
Image
more pics available on request.

$900, obo. Will consider trade for 17" 5x100 lightweight rims.
Last edited by el_torpedo on Tue Feb 26, 2013 1:25 pm, edited 2 times in total.
User avatar
el_torpedo
Master Corner Meister
Master Corner Meister
 
Posts: 1614
Joined: Sun Aug 13, 2006 12:00 am
Location: Ottawa

Re: 16" Enkei RPF1 with V710s

Postby vwgolf2lwk » Tue Jun 19, 2012 10:07 pm

Doh.... those would be perfect for Mildred! ....no cash... being poor sucks !
GP.
91' BMW 318i (Mildred - Track Rat version 2.0)
VW Golf GL VR6 SWAP "Track Rat"
02 Honda SiR
'09 Jeep (JK) Unlimited
"Knowledge" is reading the instructions - "Experience" is not - Can't remember who said it but I like it!
User avatar
vwgolf2lwk
Master Corner Meister
Master Corner Meister
 
Posts: 1628
Joined: Fri Jun 17, 2005 12:00 am
Location: Ottawa

Re: 16" Enkei RPF1 with V710s

Postby el_torpedo » Wed Aug 01, 2012 8:02 am

price drop, buy these - you will be fast!
User avatar
el_torpedo
Master Corner Meister
Master Corner Meister
 
Posts: 1614
Joined: Sun Aug 13, 2006 12:00 am
Location: Ottawa

Re: 16" Enkei RPF1 with V710s

Postby DDragon7 » Wed Aug 01, 2012 8:52 pm

If only these were 16x8. :(
Image
Ottawa Honda Club - admin
2001 Honda Civic Si (#177)
DDragon7
Corner Carver
Corner Carver
 
Posts: 55
Joined: Tue Aug 25, 2009 7:21 am

Re: 16" Enkei RPF1 with V710s

Postby shwafia » Tue Aug 07, 2012 10:53 am

DDragon7 wrote:If only these were 16x8. :(


Unless you're looking to run more than a 235 tire, I believe these are good for you.
#326 - Supercharged RSX Type-S
User avatar
shwafia
Corner Meister
Corner Meister
 
Posts: 262
Joined: Wed Oct 21, 2009 10:30 am

Re: 16" Enkei RPF1 with V710s

Postby DDragon7 » Tue Aug 07, 2012 7:35 pm

shwafia wrote:
DDragon7 wrote:If only these were 16x8. :(


Unless you're looking to run more than a 235 tire, I believe these are good for you.


I want to run 225 and I find that 7" wide is a little too narrow, even for the 215 that I'm using. I find that the side wall still flexes more than I would like it to and when going to 225, that would be a lot more flex and less response.
Image
Ottawa Honda Club - admin
2001 Honda Civic Si (#177)
DDragon7
Corner Carver
Corner Carver
 
Posts: 55
Joined: Tue Aug 25, 2009 7:21 am

Re: 16" Enkei RPF1 with V710s

Postby condor888000 » Tue Aug 07, 2012 7:40 pm

Can you fit 15s? Some good 4x100 15x8 or 15x9 options in that diameter.
Pat - #116 Miater, formerly MZ3
User avatar
condor888000
Master Corner Meister
Master Corner Meister
 
Posts: 1473
Joined: Sun Aug 10, 2008 1:07 pm

Re: 16" Enkei RPF1 with V710s

Postby wing » Tue Aug 07, 2012 7:55 pm

V710's won't flex. :D
Faster than:
Andrew “ACP” Comrie-Picard 9/09
Patrick Carpentier 10/09
Patrick Carpentier 3/10 (with the help from Scott Goodyear)
Image
User avatar
wing
Clerk of the Course
 
Posts: 5876
Joined: Sun Oct 03, 2004 12:00 am
Location: Kanata

Re: 16" Enkei RPF1 with V710s

Postby el_torpedo » Wed Aug 08, 2012 5:54 am

also wider rims will be heavier and therefore slower :)
User avatar
el_torpedo
Master Corner Meister
Master Corner Meister
 
Posts: 1614
Joined: Sun Aug 13, 2006 12:00 am
Location: Ottawa

Re: 16" Enkei RPF1 with V710s

Postby PMcD » Wed Aug 08, 2012 12:07 pm

900 obo!! This is over 2 grand of wheels and tires. Someone buy these. geez.

Pete, you should post this on the CASC forums. They'll sell pretty much right away.
Pat McDermott
User avatar
PMcD
Master Corner Meister
Master Corner Meister
 
Posts: 1711
Joined: Thu Aug 25, 2005 12:00 am
Location: Orleans, Ontario

Re: 16" Enkei RPF1 with V710s

Postby el_torpedo » Tue Feb 26, 2013 1:19 pm

Well it's time to be thinking about the next season. Back for sale, this super-mega-awesome rim-tire combo!
If you want to be first in class, you need these! If they don't fit your car, sell your car and get one that fits these wheels - it's totally worth it! :thumbup:
User avatar
el_torpedo
Master Corner Meister
Master Corner Meister
 
Posts: 1614
Joined: Sun Aug 13, 2006 12:00 am
Location: Ottawa

Re: 16" Enkei RPF1 with V710s

Postby sb_600 » Tue Feb 26, 2013 2:26 pm

PM sent!
Shawn - #915 - 1992 BMW 325i

Image
User avatar
sb_600
Master Corner Meister
Master Corner Meister
 
Posts: 1627
Joined: Mon May 25, 2009 4:30 pm
Location: Ottawa, ON

Re: 16" Enkei RPF1 with V710s

Postby sb_600 » Tue Feb 26, 2013 4:39 pm

These are officially mine! :drivin:

Ok well actually they're Andrea's.... and we only really want the wheels, so the tires are still for sale!

If anyone wants JUST the tires, PM me!

Thanks :)
Shawn - #915 - 1992 BMW 325i

Image
User avatar
sb_600
Master Corner Meister
Master Corner Meister
 
Posts: 1627
Joined: Mon May 25, 2009 4:30 pm
Location: Ottawa, ON

Re: 16" Enkei RPF1 with V710s

Postby inverted » Tue Feb 26, 2013 9:27 pm

nice... I wish they weren't so short or I'd jump on 'em.
Image
Mike S
#89 2006 MATRIX XRS (E/STF)
#131 1992 Civic (Winter mode)
http://www.youtube.com/user/inverted83/videos
inverted
Corner Meister
Corner Meister
 
Posts: 447
Joined: Mon Sep 12, 2011 10:16 am

Re: 16" Enkei RPF1 with V710s

Postby sb_600 » Wed Apr 17, 2013 1:34 pm

Bump!


I'm hopefully picking these up from Pete next week - the tires are still for sale!

PM me if you're interested!
Shawn - #915 - 1992 BMW 325i

Image
User avatar
sb_600
Master Corner Meister
Master Corner Meister
 
Posts: 1627
Joined: Mon May 25, 2009 4:30 pm
Location: Ottawa, ON


Return to Want Ads/For Sale

Who is online

Users browsing this forum: No registered users and 1 guest