Buy a cheap universal exhaust hanger from CTC and cut the conveyor belt type rubber off the brackets. Its about 2 inches long, about an inch wide and is plenty thick and quite heat resistant. Cost about 2 bucks.
Or take it to a shop with a big ass torch and have them heat the pipe up a bit and bend it away from the hitch so it is fixed properly once and for all!
Member: CASC (TSOA, St LAC)-1963/MCO-1967
MCO Past President: 1974, 1993, 2007-2010
1953 Meteor/1977 TR 7-V8/1983 Yamaha Seca 900
Multi-Certified InterProvincial Technician (310G, 310S, 310T, 717B)
ASE Master Automobile Technician